2025-06-27
Hand chain hoist should be regularly adjusted. Chain tension: If the design allows, adjust the chain tension to an appropriate state (refer to the instructions). Brake: If testing reveals that the bra
Learn More>>
2025-06-27
Explosion-proof hand chain hoist lubrication: Chain: Use a special explosion-proof chain grease (usually a low volatility, metal-free, with good penetration and anti-wear properties). Apply the grease
Learn More>>
2025-06-26
Maintenance precautions for explosion-proof electric hoists:1. Maintain explosion-proof performance: This is the goal of maintenance for explosion-proof hoists. Any operation that damages the explosio
Learn More>>
2025-06-25
1. Manual Drive: Pulling the hand chain to rotate the drive sprocket.2. Gear Reduction: Amplifying the force through 2-3 stages of gear transmission (reduction ratio about 1:20).3. Hoisting Execution:
Learn More>>
2025-06-25
Zinc plating of lifting chains: The main purpose is to prevent corrosion. Types include: Galvanizing: Electroplating a thin layer of zinc on the surface of the chain. It has relatively low cost and a
Learn More>>
2025-06-24
The application scenarios of stainless steel hand chain hoists are suitable for food and beverage processing, pharmaceuticals, chemical industry, marine engineering, ships, sewage treatment, coastal h
Learn More>>
2025-06-23
Common Faults and Solutions for a 0.5-ton Hand Chain Hoist:1. Chain Jam: Check if it is twisted or knotted → Straighten the chain; lubricate the sprocket groove.2. Sudden Increase in Pull Force: Stop
Learn More>>
2025-06-23
A '6 millimeter 80 grade lifting chain' is a very common industrial lifting component. The meaning: 1. 6 millimeters refers to the nominal diameter of the chain. This indicates the nominal diameter of
Learn More>>
