CURRENT LOCATION:

Home / About/News

Precautions for Selecting and Using the MD1 Electric Hoist

2025-10-27

rizhi

MD1 Electric Hoist Selection and Usage Guidelines · Selection Reference: The lifting speeds can vary depending on the load capacity of the hoist. For example, the normal lifting speed for hoists up to 5 tons is 8 meters per minute, for 10-ton hoists it is 7 meters per minute, and for 16-ton hoists it is 3.5 meters per minute. · Precautions: · Prohibited Usage Scenarios: This hoist must not be used for lifting molten metal, toxic, flammable, or explosive materials. It is also prohibited from use in environments with a high risk of explosion or in areas filled with corrosive gases. · Replacement of the Wire Rope: The wire rope should be immediately replaced if it exhibits signs of extensive breakage, strand fractures, or if the diameter has worn down or corroded to such an extent that it has reduced by 7% from its nominal diameter. · Pre-Use Inspection: Before using the hoist, ensure that the brakes are functioning reliably. Check the wire rope for any signs of bending, deformation, corrosion, or excessive breakage. We hope that the above information helps you gain a comprehensive understanding of the MD1 electric hoist with wire rope. If you have specific requirements regarding the lifting capacity, lifting height, or budget, we can provide you with more tailored selection recommendations.

RECOMMENDED PRODUCTS

RELATED NEWS

CATEGORIES