None
The 7.1mm lifting chain has 4 times the safety factor, 2.5 times the test load, 3 times the universal pitch, carries 1.5 tons...
The 18mm lifting chain is made of 20Mn2 (manganese steel), with a maximum working load of 10T. The surface treatment includes...
16mm lifting chain can produce various non-standard or specific strength and grade chains according to customer needs, thus b...
The 14mm lifting chain can be polished, blackened, dipped in paint, hung with plastic, electroplated, etc.Widely used in high...
2025-06-23
Common Faults and Solutions for a 0.5-ton Hand Chain Hoist:1. Chain Jam: Check if it is twisted or knotted → Straighten the chain; lubricate the sprocket groove.2. Sudden Increase in Pull Force: Stop
Learn More>>
2025-06-23
A '6 millimeter 80 grade lifting chain' is a very common industrial lifting component. The meaning: 1. 6 millimeters refers to the nominal diameter of the chain. This indicates the nominal diameter of
Learn More>>
2025-06-20
After the explosion-proof hoist is damaged, it should be stopped from use. The chain wear to a diameter reduction of ≥10% or with cracks. The hook opening deformation >10% or dangerous section wear. T
Learn More>>
2025-06-20
Lifting chains with diameters of 4-26 millimeters are differentiated by the diameter of their links. How to determine the specification? 1. Determine the required working load. 2. Choose an appropriat
Learn More>>