Wire rope electric hoist operating steps (standard process)

1. No-load test machine - inching up, down, left and right (sports car)

- Confirm that the action is consistent with the button, there is no jamming, and the limit is effective

2. Lifting - the hoist is moved directly above the heavy object

- Drop hooks and secure spreaders/rigging

- Inching up, hoist about 10cm from the ground and stop

- Check: braking, binding, balancing, wire rope status

3. Lifting - rising and moving at a constant speed

- Cable-staying, diagonal lifting and overloading are prohibited

- It is strictly prohibited to stand under heavy objects or pass over people.

4. Place - Move directly above the placement point

- Slowly inching down and landing smoothly

- Unhook and confirm detachment

5. End of operation - the hook rises to more than 2m (anti-collision)

- The hoist stops at the designated position

- Cut off the main power and return the button to its original position