None
The 7.1mm lifting chain has 4 times the safety factor, 2.5 times the test load, 3 times the universal pitch, carries 1.5 tons...
The 18mm lifting chain is made of 20Mn2 (manganese steel), with a maximum working load of 10T. The surface treatment includes...
16mm lifting chain can produce various non-standard or specific strength and grade chains according to customer needs, thus b...
The 14mm lifting chain can be polished, blackened, dipped in paint, hung with plastic, electroplated, etc.Widely used in high...
2025-06-25
1. Manual Drive: Pulling the hand chain to rotate the drive sprocket.2. Gear Reduction: Amplifying the force through 2-3 stages of gear transmission (reduction ratio about 1:20).3. Hoisting Execution:
Learn More>>
2025-06-25
Zinc plating of lifting chains: The main purpose is to prevent corrosion. Types include: Galvanizing: Electroplating a thin layer of zinc on the surface of the chain. It has relatively low cost and a
Learn More>>
2025-06-24
The application scenarios of stainless steel hand chain hoists are suitable for food and beverage processing, pharmaceuticals, chemical industry, marine engineering, ships, sewage treatment, coastal h
Learn More>>
2025-06-23
Common Faults and Solutions for a 0.5-ton Hand Chain Hoist:1. Chain Jam: Check if it is twisted or knotted → Straighten the chain; lubricate the sprocket groove.2. Sudden Increase in Pull Force: Stop
Learn More>>