None
The 7.1mm lifting chain has 4 times the safety factor, 2.5 times the test load, 3 times the universal pitch, carries 1.5 tons...
The 18mm lifting chain is made of 20Mn2 (manganese steel), with a maximum working load of 10T. The surface treatment includes...
16mm lifting chain can produce various non-standard or specific strength and grade chains according to customer needs, thus b...
The 14mm lifting chain can be polished, blackened, dipped in paint, hung with plastic, electroplated, etc.Widely used in high...
2025-05-12
Steps for replacing the chain on a hand-operated pulley:1. Remove the outer shell of the hand-operated pulley and take out the old chain.2. Thread the new chain into the guide wheel and gear slot of t
Learn More>>
2025-05-12
The screw jack is a mechanical structure jack. It differs from the hydraulic jack in that it does not contain liquid inside. The interior consists of gears, allowing for lifting both horizontally and
Learn More>>
2025-05-09
1. Precautions: The chain of the hand-operated pulley should be lubricated regularly to avoid jamming; slanting hoisting or overloading is prohibited. When operating the pulley, pay attention to reset
Learn More>>
2025-05-08
A small gantry crane with a load capacity of 200 kilograms to 2 tons. The gantry frame is supported by steel columns and uses I-beams as the lifting beams. Four universal casters with brakes are insta
Learn More>>