Daily cleaning: After use, clean the surface with a dry cloth to remove oil stains, dust, and mud (especially on chains and gears). After working in humid environments, use a dry cloth to absorb moisture to prevent rust. Do not use gasoline or strong solvents for cleaning to avoid corroding seals.
None
The 7.1mm lifting chain has 4 times the safety factor, 2.5 times the test load, 3 times the universal pitch, carries 1.5 tons...
The 18mm lifting chain is made of 20Mn2 (manganese steel), with a maximum working load of 10T. The surface treatment includes...
16mm lifting chain can produce various non-standard or specific strength and grade chains according to customer needs, thus b...
The 14mm lifting chain can be polished, blackened, dipped in paint, hung with plastic, electroplated, etc.Widely used in high...
2025-06-11
Daily cleaning: After use, clean the surface with a dry cloth to remove oil stains, dust, and mud (especially on chains and gears). After working in humid environments, use a dry cloth to absorb moist
Learn More>>
2025-06-10
Luffa Maintenance Cycle Recommendations: After each use: Basic cleaning (dust removal, foreign object elimination), visual inspection. Every 50 uses or monthly (whichever comes first): Thorough cleani
Learn More>>
2025-06-10
Functional inspection (must be done before each use and during maintenance):No-load test:Smoothness: Pull the chain to check if the ascent and descent are smooth, without jamming, abnormal noise, or a
Learn More>>
2025-06-09
Before maintenance, ensure that the hoist is completely unloaded and in a safe condition. Any abnormal function (such as chain jamming, brake slippage, unusual noise, excessive operation) indicates po
Learn More>>
