None
The 7.1mm lifting chain has 4 times the safety factor, 2.5 times the test load, 3 times the universal pitch, carries 1.5 tons...
The 18mm lifting chain is made of 20Mn2 (manganese steel), with a maximum working load of 10T. The surface treatment includes...
16mm lifting chain can produce various non-standard or specific strength and grade chains according to customer needs, thus b...
The 14mm lifting chain can be polished, blackened, dipped in paint, hung with plastic, electroplated, etc.Widely used in high...
2025-06-20
Lifting chains with diameters of 4-26 millimeters are differentiated by the diameter of their links. How to determine the specification? 1. Determine the required working load. 2. Choose an appropriat
Learn More>>
2025-06-19
Depth Inspection:- Chain: Thoroughly check the condition of each link, measure the wear at critical positions (such as link diameter), and determine if replacement is necessary. Check if the connectin
Learn More>>
2025-06-19
Quenching Process Flow: Cutting and Chain Formation: The raw material is cut to the required length and then woven into a chain. Preheating: (Optional but recommended, especially for alloy steel or la
Learn More>>
2025-06-18
Visual Inspection: Before use: Quickly check the shell for severe bumps, deformation, cracks (especially at the explosion-proof joint surfaces). After use: Check for new damage or abnormal wear. Chain
Learn More>>