None
The 7.1mm lifting chain has 4 times the safety factor, 2.5 times the test load, 3 times the universal pitch, carries 1.5 tons...
The 18mm lifting chain is made of 20Mn2 (manganese steel), with a maximum working load of 10T. The surface treatment includes...
16mm lifting chain can produce various non-standard or specific strength and grade chains according to customer needs, thus b...
The 14mm lifting chain can be polished, blackened, dipped in paint, hung with plastic, electroplated, etc.Widely used in high...
2025-06-10
Functional inspection (must be done before each use and during maintenance):No-load test:Smoothness: Pull the chain to check if the ascent and descent are smooth, without jamming, abnormal noise, or a
Learn More>>
2025-06-09
Before maintenance, ensure that the hoist is completely unloaded and in a safe condition. Any abnormal function (such as chain jamming, brake slippage, unusual noise, excessive operation) indicates po
Learn More>>
2025-06-09
After use, the chain block should be stored properly: clean, lubricate, and dry before storage. Store it in a dry, ventilated room free from corrosive substances. Straighten out the chains to avoid tw
Learn More>>
2025-06-06
How to clean a hand chain hoist:Cleaning surface dirt:Dry brushing/cloth wiping: Use a dry, clean brush (such as an old toothbrush or wire brush with care) or cloth to remove loose dirt such as dust,
Learn More>>